Качай World of Warships и Играй бесплатно на ПК — wo.ws/2IanylO и на Консолях: World of Warships: Legends
Французкие окна, это счастье, но вместе решение поставить себе эту красоту, надо быть готорым и к некоторым затратам.
Внутрипольный конвектор. Почему эта батарея такая дорогая?
Как сделать конвектор в пол своими руками?
Как выразился один мой знакомый — #Внутрипольный #конвектор — это сын #батареи отопления и теплого пола, кузен мусоросборника и племянник вентиляционной решетки. Не могу не согласиться, но без него никак, если у вас французкое окно.
Покупать дорогие системы, или экономить, монтируя систему самостоятельно, решать конечно же Вам, лично я сделал своими руками, и уверен, что не пожалею об этом! Экономия на лицо, все подробности вы узнаете в фильме. О том как просто сделать конвектор для французкого окна пойдет речь сегодня.
Потрачено:
Лист металла 1500х2000 – 2000 р.
Труба Д57 – 12 метров – 2500 р.
Краска 500 р.
Повороты 180 р.
Сгоны 68 р.
Кран Маевского 55 р.
Решетка примерно 1000 р.
It was around three months ago when I visited my friend that works at the steel waste. He made an amazing found. He found multible items that were in a very rough condition. They almost had some kind of concrete on them and a lot of heavy rust. This little screwdriver got my attention right away. It was not clearly visible what the function of it was, but I remember that I thought it might be some kind of ratchet mechanism. At home I posted a few pics of it in my Instagram story. It didnt took long for @hand tool rescue to reply, as he has the same screwdriver, just a slightly modern version of it, but similar mechanism. After some research I found some more pics and videos online. The brand is „Weltrekord“ made in Germany and its called „Hebelschraubenzieher“ which meas „lever scredriver“. The model I found was the first ever designed one from 1891. Weltrekord later made some small changes on the design. Newer ones have a small collet to clamp the insert bits and even newer ones came with plastic handles instead of wood.
At first I thought this will be a quick straight forward restoration project. It turned out to be a very tricky one. The most difficult part was definitely the disassembly, it took me three full days to get it in pieces. Heavy rust has done so much damage to all of the parts. Unfortunately the handle cracked when I removed it. I tried to restore it, but it became a huge mess and I decided to make a new one to have a nice and clean look. Theres a 40 minutes version of this video on my Patreon page where I show how I tried to repair the handle. I had to weld up material on a lot of parts and machined and sanded it clean afterwards. That all worked perfectly fine. Some parts have still very slight pitting but overall it turned out very well. For the finish on the steel parts I decided to try nickel plating for the first time and it worked fantastic. I went with a brushed finish and with the nickel coat the parts turned out amazing. I really like the look of the nickel plated parts with the wooden handle.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Adel AlSaffar
Gregory
Alex McGeorge
Courtney Maleport
David Barker
Greg Marston
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vickie Bligh
Vince Valenti
Xavier Carbel
Yale Baker
Alex Breton
alex latzko
Alex Shipley
Aljoscha Erlebach
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Cristian Zorrilla
Dre Gilley
Grok Senften
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
Joshua Bentley
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
PerryK
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Trevor Kam
Warren G Strand Jr
웅록 윤
Time and costs of this restoration:
$5 wood for the handle
$3 spring steel wire
$10 vinegar for nickel solution
I was working on this project for 2 weeks
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
مباني بالطوب الاحمر تصميم حديثه ورسمات فاقت الجمال
تعلم بناء القبه مسجد الجزء الاول 1
في الجزء الاول نقوم بعمل سنتر في وسط البنياء سمه ناخذ من قل رقن مقاسات بالمتر اضع خيط في السنطر لضبط الدوران وانسحب البدماك الاول سما نحدد مقاس الشبابيك لذرع اكتاف برواز
فيس بوك www.facebook.com/profile.php?id=100015062766096
Попробовал НАСАДКУ на КОТОРУЮ еще НИКТО НЕ ЛОВИЛ ЗИМОЙ! РЕЗУЛЬТАТ ПРОСТО ПОРАЗИЛ!
Летом ловил с этой насадкой youtu.be/f8kOukFjwT8
ПОКЛЕВКИ леща на поплавок зимой youtu.be/vJzSweGEAkY
Перчатки неопреновые (размер L) ali.pub/4939pl
— Предложить автомобиль на обзор — avtokriminalist.test@yandex.ru
Mazda 3, автомобиль куплен без проверки экспертом. После покупки автомобиля новый владелец поехал в ГАИ, чтобы зарегестрировать свою Мазду. На площадке осмотра машину остановили для дополнительной проверки. Через несколько часов сотрудник полиции сказал, что в блоке управления другой VIN, и этот номер находится в розыске. Забрали ПТС, но машину отдали до экспертизы. Владелец автомобиля решил разобраться в этой ситуации и обратился ко мне, чтобы я проверил этот автомобиль. После моей проверки оказалось, что машина действительно криминальная, поддельная маркировочная табличка, изменен номер кузова, и даже перебит номер двигателя. Кроме того, удалось определить первоначальный номер двигателя.
Комплексная проверка и диагностика автомобиля. Проверка кузова, двигателя и пробега. Автокриминалист Максим Шелков
— Диагностика автомобиля перед покупкой
— Проверка автомобиля с выездом к авто
— Подбор автомобиля на заказ
— Экспертиза номеров: VIN, кузов, рама, двигатель
— Проверка документов автомобиля