Течет кран (смеситель) — это частая проблема. Починить кран очень просто, дело пяти минут!
=====================================
Вентильная головка (в просторечии кран-букса) — это устройство для подачи и закрытия воды в двуручковых смесителях — для холодной и горячей воды соответственно. Чаще всего изготовляется из латуни.
Металлокерамические буксы — в этих буксах подача/закрытие воды осуществляется при помощи металлокерамических тщательно отполированных дисков, обычно из окиси алюминия. Шлямбур в таких буксах имеет цилиндрическую форму с отверстиями по бокам цилиндра. Штуцер имеет два выступа, соединяемых с верхним, подвижным диском. Оба диска имеют прорези для подачи воды (верхний подвижный — V-образные вырезы, с которыми соединяются выступы штуцера; нижний неподвижный — окошки треугольной формы). Для открытия/закрытия такого крана нужно повернуть маховик на 90° в ту или иную сторону — тогда прорези либо совмещаются (вода идёт), либо перекрываются (воды нет). В торец шлямбура вставляется упорная резиновая прокладка, прижимающая нижний диск к верхнему, благодаря чему обеспечивается герметичность.
How to Make a Concrete Barrel Waterfall Fountain. Its an awesome Concrete Project You Can Make at Home!!! In this tutorial, I show you how to make awesome Awesome Waterfall Fountain using mainly a cement and Sand. It’s fun to make and you can use it as an awesome decoration.
Nb: Use a SAFETY MASK during cutting the Styrofoam with Soldering Iron!
The ratio of a concrete mixture:
2,5 cups Ordinary Portland Cement
1 cup Sand
Water
— Themes of the project:
Do it yourself, how to make waterfall fountain of cement, how to build a concrete water fountain decoration, homemade waterfall fountain, wonderful recycle DIY craft, easy recycled project, DIY creative ways to reuse, recycling craft project, easy and cute recycling idea, easy crafts made with recycled materials, using recycled materials in full tutorial, idea for making fountain from cement and recycled materials, best out of waste idea, waterfall fountain making using waste materials, DIY home decoration idea, do it yourself, how to make waterfall fountain of cement, how to build a concrete water fountain decoration, homemade waterfall fountain, wonderful recycle DIY craft, easy recycled project, DIY creative ways to reuse, recycling craft project, easy and cute recycling idea, easy crafts made with recycled materials, using recycled materials in full tutorial, idea for making fountain from cement and recycled materials, best out of waste idea, waterfall fountain making using waste materials, DIY home decoration idea
Home upgrades are essential and what better way to do it than learning to “Do It Yourself ”. We have an inspirational video packed with incredible home upgrades and ideas that are easily affordable and achievable for us all to take part in. Here at Quantum Tech HD, we believe that learning is an essential life skill and that we must use it to keep evolving, so let’s take a tour and find out what all the fuss is about at home!
In this video im restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Every project you try is at YOUR OWN RISK.
3 Drill Machine Life Hacks You Should Know-https://goo.gl/7Ckdfh
How to make -https://goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
— Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, havent you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!