Всем привет! Да, теперь мы снова выходим по четвергам! И да, сегодня будет очень интересное оживление довольно необычного автомобиля! История такая: жил себе Кадиллак, никого не трогал и вдруг заглох… На три года! Приятного просмотра!)
Ильдар Авто-подбор это официальный канал компании авто-подбор.рф.
Подбор подержанных автомобилей.
Выездная диагностика.
Проверка бу авто перед покупкой по 105 пунктам: состояние двигателя и АКПП, электрика и электроника, кузов и ходовая.
I had this idea since I recently discovered how to easily make balls on the milling machine and lathe. As I currently dont know what to restore next, I decided to make the 8 ball. It was a very cool little project. Very accurate work was needed to get all six individual pieces fit together with no gaps. The hardest part of this project was filming the last few shots, because it is so super shiny now and reflects everything. I really like how it turned out and it will be a nice decoration piece to look at.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Adel AlSaffar
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Courtney Maleport
David Barker
Diecast Pirate
Greg Marston
Lambda GPU Workstations
Matt Bosch
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vickie Bligh
Vince Valenti
Xavier Carbel
Yale Baker
Yuri Zapuchlak
Alex Breton
alex latzko
Alex Shipley
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Easy Green
Grok Senften
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
PerryK
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Todd Medbury
Trevor Kam
Warren G Strand Jr
XL S
웅록 윤
Time and costs of this project:
$25 material
I was working on this project for 4 days
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
I bought this vise pretty much 1.5 years ago together with the other Gressel bench vise I already restored and made a video. I also payed $20 for this one. Since then it was laying aroung in my basement. I always knew that Ill restore this one as well, just because its a Gressel and it will totally worth to safe it from the trash.
This one wasnt that rusty like the other one, but it was also completely deadlocked. The handle was beaten up and bent. The jaws, some screws and two pieces to hold the spindle were missing. The pin that secures the spindle from turning was broken. Because of all that the spindle fell out. This vise has two threads and two concentric bushings to keep the jaws in place. Talking to Gressel I found out that this method was only produced until 1960, so its at least 60 years old now. It could be from 1943, as both parts had a „43“ stamped on them. As these original jaws are getting no longer produced, I decided to drill an extra hole between the threads to be able to use new jaws. Gressel was so nice to send me new flat jaws. All the bare surfaces were in really bad condition due to heavy use, thats why I decided to weld up material and clean all these surfaces on the milling machine. I replaced the handle with a new one, but I used the old rounded ends again which turned out great. I later secured the ends with Loctite when reassembling. I also made the two missing screws and the broken pin out of the old handle. I choose to paint the whole vise the same color as the movable jaws from the new Gressel vises are, cobalt blue (RAL5013). I think it turned out very well, the white lettering, the shiny bare spots and the black parts match very well.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Adel AlSaffar
afreeflyingsoul
David Barker
Gregory
Muzaffer Aksoy
Vince Valenti
Yale Baker
Alan Hanson
alex latzko
Amanda Taylor, Esq
Andreas Mimra
Andreswara Hermawan
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Courtney Maleport
Cristian Zorilla
Dan Williams
Dre Gilley
Harper Kim
Hunter R.
JD Smith
Jessica Alexander
Joel Miller
Jonas Richartz
LVE
Marc Cercier
Martin Rønnow Klarlund
Mauricio Pacheco
Mellissa Marcus
Mellissa McConnell
Nick Cannon
Paul Ambry
Paul Mampilly
Risky Deem
Robert Everich
Shikidixi
Trevor Kam
TRG Restoration
웅록 윤
Timestamps:
00:00 preview
00:44 disassembling
02:45 showing all the parts
02:53 cleaning the parts with the parts washer
03:11 removing the old bushings
04:24 sandblasting
05:17 restoring the fix jaw
07:57 restoring the movable jaw
09:45 restoring the ends of the handle
10:37 making a new handle on the lathe
11:48 restoring the spindle nut
13:15 restoring the spindle nut holder plate
14:05 making two new screws for the plate on the lathe and milling machine
15:27 restoring the spindle
16:21 making a new pin for the spindle on the lathe
17:04 making the missing parts for the spindle on the lathe and milling machine
18:12 applying filler
18:52 painting
19:41 showing the new jaws
19:54 showing the new hardened pins
19:57 showing all parts before reassembling
20:09 reassembling
22:26 showing the finished restoration
23:22 final test
23:49 Patreon supporters
Time and costs of this restoration:
I was working on this project for 2 weeks
$20 vise
$20 2k primer
$30 2k coat cobalt blue (RAL5013)
$30 steel for new parts
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Как сделать простую межэтажную лестницу с минимальным бюджетом и минимумом свободного пространства? Это изготовление деревянной лестницы своими руками шаг за шагом.
Вас приветствует канал MY GALAXY жизнь своими руками.
Это серия видеороликов о строительстве недорогого дома из газобетона. В ней мы подробно на своем опыте показываем все строительные этапы от закладки фундамента до инженерных и отделочных работ.
Тема строительства своего дома в жизни тебя обязательно коснется и наши видео станут для тебя находкой, подпишись на наш канал: www.youtube.com/channel/UCMb3YscxDOo7rgJ-AvrCXdw?sub_confirmation=1
Добрый день! В этом ролике рассказываем вам о нашей АКЦИИ — Участок в ПОДАРОК!!!
Что надо сделать:
— Позвонить и записаться на встречу
— Выбрать участок
— Выбрать дом
— Согласовать проект
— Построить дом в срок от 1 до 6 мес.
Получить выбранный участок — БЕСПЛАТНО!!!
Подробности по тел:
8-953-320-00-00
8-800-700-76-26
Срок акции до 15.03.2020г.