Restoration of a rare vintage ww2 military watch - nickel and chrome plating - Sanford AS1123


This time I´m restoring an old military watch from the WW2-Era.
It´s a Sanford with an AS 1123 movement.

The watch is in a really bad condition. The chrome-plating of the case is heavy damaged, the glass is scratched the movement is full of dirt and stops repeatedly.

I need to grind off the old chrome. After sanding and polishing the case, it´s ready for a new chrome-plating. But i need to add a layer of nickel before. The glass will be polished and the movement cleaned. Unfortunately the old radium-compound on the hands fell off so i need to re-lume the hands with super-luminova. I will add some coffee to it to make it more «vintage-looking».

After everything is cleaned, polished and re-plated, I can re-assemble the movement with some fresh oil. After that, this watch is in a good beat ( 6 seconds per day) again.

I hope you liked this restoration, if so, like, comment and subscribe ;)

Subscribe to my channel:
www.youtube.com/c/RedDeadRestoration?sub_confirmation=1

Music:
«Our Volunteers Waltz» by United States Marine Band
«Et Voila» by Chris Haugen

___________________________________

Follow me on Instagram:
www.instagram.com/reddeadrestoration

Facebook:
www.facebook.com/RedDeadRestoration

Patreon:
www.patreon.com/Reddeadrestoration

___________________________________

Acrylic Glass Polishing Compound: amzn.to/2XIP8vF **
Case Polishing Diamond Paste: amzn.to/2Ye1MSo **
Case Polishing Wadding: amzn.to/2UlNfme **
Thermo-Tape: amzn.to/30YktME **
Fiber Glass Pen: amzn.to/2AQfpzi **
UV-Lamp: amzn.to/3iuOSJ8 **
UV-Glue: amzn.to/3ghGSZK **
Rodico: amzn.to/3eWtTN2 **
Multi-Purpose Watch-Repair-Kit: amzn.to/2XIQ7Mn **
Multitool: amzn.to/2BNryW9 **
Buffing Wheels for Multitool: amzn.to/30gJCSF **
My Camera: amzn.to/32er4BJ **

** Affiliate Links
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows me to continue to make videos like this. Thank you for the support!

Broken Deadlocked Vise - Perfect Restoration (I did it again)


I bought this vise pretty much 1.5 years ago together with the other Gressel bench vise I already restored and made a video. I also payed $20 for this one. Since then it was laying aroung in my basement. I always knew that Ill restore this one as well, just because its a Gressel and it will totally worth to safe it from the trash.
This one wasnt that rusty like the other one, but it was also completely deadlocked. The handle was beaten up and bent. The jaws, some screws and two pieces to hold the spindle were missing. The pin that secures the spindle from turning was broken. Because of all that the spindle fell out. This vise has two threads and two concentric bushings to keep the jaws in place. Talking to Gressel I found out that this method was only produced until 1960, so its at least 60 years old now. It could be from 1943, as both parts had a „43“ stamped on them. As these original jaws are getting no longer produced, I decided to drill an extra hole between the threads to be able to use new jaws. Gressel was so nice to send me new flat jaws. All the bare surfaces were in really bad condition due to heavy use, thats why I decided to weld up material and clean all these surfaces on the milling machine. I replaced the handle with a new one, but I used the old rounded ends again which turned out great. I later secured the ends with Loctite when reassembling. I also made the two missing screws and the broken pin out of the old handle. I choose to paint the whole vise the same color as the movable jaws from the new Gressel vises are, cobalt blue (RAL5013). I think it turned out very well, the white lettering, the shiny bare spots and the black parts match very well.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Adel AlSaffar
afreeflyingsoul
David Barker
Gregory
Muzaffer Aksoy
Vince Valenti
Yale Baker
Alan Hanson
alex latzko
Amanda Taylor, Esq
Andreas Mimra
Andreswara Hermawan
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Courtney Maleport
Cristian Zorilla
Dan Williams
Dre Gilley
Harper Kim
Hunter R.
JD Smith
Jessica Alexander
Joel Miller
Jonas Richartz
LVE
Marc Cercier
Martin Rønnow Klarlund
Mauricio Pacheco
Mellissa Marcus
Mellissa McConnell
Nick Cannon
Paul Ambry
Paul Mampilly
Risky Deem
Robert Everich
Shikidixi
Trevor Kam
TRG Restoration
웅록 윤

Timestamps:

00:00 preview
00:44 disassembling
02:45 showing all the parts
02:53 cleaning the parts with the parts washer
03:11 removing the old bushings
04:24 sandblasting
05:17 restoring the fix jaw
07:57 restoring the movable jaw
09:45 restoring the ends of the handle
10:37 making a new handle on the lathe
11:48 restoring the spindle nut
13:15 restoring the spindle nut holder plate
14:05 making two new screws for the plate on the lathe and milling machine
15:27 restoring the spindle
16:21 making a new pin for the spindle on the lathe
17:04 making the missing parts for the spindle on the lathe and milling machine
18:12 applying filler
18:52 painting
19:41 showing the new jaws
19:54 showing the new hardened pins
19:57 showing all parts before reassembling
20:09 reassembling
22:26 showing the finished restoration
23:22 final test
23:49 Patreon supporters

Time and costs of this restoration:

I was working on this project for 2 weeks
$20 vise
$20 2k primer
$30 2k coat cobalt blue (RAL5013)
$30 steel for new parts

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Main Channel:
www.youtube.com/c/mymechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

Rusty Jammed Rebar Cutter - Restoration


In this video im restoring a hopeless case of a super rusty rebar cutter.

People from all over the world send me pictures of their items theyd like to have restored by me in a video. Mostly the items do not look bad enough, not enough rust or not broken enough for an interesting video. However this rebar cutter caught my attention from the first look at it. Marco from Italy was so nice to ship it to me to Switzerland, he gave me this shear for free means he doesnt want to have it back. Thank you very much for that. Right when I saw the pictures I knew this would probably be a very challenging restoration because of all that rust. I assumed that it would be all seized up and a nightmare to disassemble and I was right. This cutter only has four bolts and is built together by only five parts, but I was busy with the disassembling for three days. It was very difficult to get the two big bolts out, specially the smaller one. It needed 12 tons on the hydraulic press and I needed to drill one bolt hollow. I made a lot of parts new on this project, Ive only kept three parts original: the body and the two moving parts. As the handle was missing, I made a new one which required quite a few steps of machining, welding and grinding but the end result turned out very nice. As I almost made the whole thing new I decided to give this tool a modern touch with the choice of colour, thats why I went with orange.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Matthew Holcomb
Afreeflyingsoul
Andreas Prüm
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Gregory
Hunter R.
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Zachary Grimes

Timestamps:

00:00 preview
00:33 disassembling
04:07 showing all the parts
04:21 cleaning the parts with the parts washer
04:33 sandblasting
05:24 showing the sandblasted parts
05:31 restoring the body
07:01 restoring the movable jaw
07:37 restoring the movable gear part
08:14 making the small nut on the lathe
08:59 making the big nut
09:12 making the small bolt on the lathe
10:21 making the big bolt
10:35 making two washers for the bolts on the lathe
11:11 making two new M8 bolts and washers on the lathe
12:10 start of making the missing handle
12:15 preparing the tube on the lathe
12:54 making the domed cap on the lathe
13:20 welding the domed cap on the tube
13:29 cleaning up the welds of the domed cap on the lathe
13:46 making the connection piece to the tool on the lathe
14:57 milling the sides flat and welding up the plates
16:19 welding the connection piece on the tube and turn it clean on the lathe
16:50 making two threads in the connection piece
17:14 sandblasting the handle
17:28 bluing all the parts
18:08 painting the handle and the body
18:43 making two new cutting bits
19:20 hardening and tempering the cutting bits
20:03 showing all the parts before reassembling
20:17 reassembling
21:52 showing the finished restoration
22:43 final test

Time and costs of this restoration:

I was working on this project for 3.5 weeks
$60 painting (primer and orange coat)
$50 dinner for my friend for the hardening :-)

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

my mechanics T-Shirts:
teespring.com/stores/my-mechanics

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

Curved Stair Armrest Saves Space // Make Use of Small Wood Pieces with Curved Woodworking Project


Hello, This is: Skills and Technisques Design and Build Wooden Stair Handles, Simulation elephant tentacle, Curved Stair Armrest Saves Space For Your House!
AND Craftsman Using small pieces of wood assembled together with 2-component glue and double-headed screws, creating flexibility and firmness for stair handrails…
#StairHandles #CurvedStair #Armrest #SavesSpace #nevertoosmall #CurvedWoodworking #WoodwrkingProjects #woodprocessing #SkillsandTechnisques #Design #Build
Thanks for watching, LIKE, Subscribe

ПОГРЕБ ЗАЧЕМ И ПОЧЕМУ / HOW TO BUILD CELLAR /КАК ПОСТРОИТЬ ПОГРЕБ / ПОГРЕБ СТРОИМ САМИ


Если вам нужна консультация Горячего Мастера на вашей стройке или доме приглашайте мастера к себе по телефону 89273093674

Станьте спонсором канала, и вы получите доступ к эксклюзивным бонусам. Подробнее:
www.youtube.com/channel/UCC9x...
посмотрите наши видео по этой теме —
0 www.youtube.com/watch?v=ZqFBEhR3KfQ

ТЕБЯ УДИВИТ ТО, ЧТО Я СДЕЛАЛ ИЗ ЭТОГО НАБОРА МЕТАЛЛОЛОМА!!!


Сотрудничество: vk.com/evvggen
Для тех кто любит ЧИТАТЬ оставлю ссылку на мой канал в Яндекс ДЗЕН: zen.yandex.ru/boroda_master
ИНСТАГРАМ: www.instagram.com/borodaty_master/
КАНАЛ Я ИГРАЮ НА ГИТАРЕ: www.youtube.com/channel/UCq4Y...
ВК: vk.com/boroodatiy
facebook: www.facebook.com/profile.php?id=100011795583257
JET ОБОРУДОВАНИЕ:
JET BD-6 ТОКАРНЫЙ СТАНОК
clck.ru/KzQTZ
JET JDP-13FM Напольный сверлильный станок
clck.ru/KzQTm
JET JWL-1220LVS токарный станок по дереву
clck.ru/KzQUU
865M WILTON Тиски «Механик ПРО»
clck.ru/KzQUp
JET JBG-200 Заточный станок
clck.ru/MBPZz
JET JMD-1L Фрезерно-сверлильный станок
clck.ru/MBPaE
JET JPT-10B Фуговально-рейсмусовый станок
clck.ru/MBPbB
JET JBS-12 Ленточнопильный станок
clck.ru/KzQVK
JET JRT-2 Универсальный чугунный фрезерный стол
clck.ru/NshUF
TRITON TRA001 Двухрежимный погружной фрезер с микролифтом
clck.ru/NshVS
JET JSMS-12L Торцовочно-усовочная пила
clck.ru/NshYH
JET J-350V Ленточнопильный станок
clck.ru/NshZN
JET DC-900A Вытяжная установка
clck.ru/Nshaf
AFS-1000B Фильтрующая система clck.ru/Qntgj
JSG-233A-M Тарельчато-ленточный шлифовальный станок 230 В clck.ru/QntiZ

Я хочу вам представить самоделки своими руками в домашних условиях. Я делаю приспособление, и удивительные устройства. Каждый инструмент или самоделка может облегчить вашу жизнь.Сделайте и себе самодельный инструмент с которым будет просто работать в гараже или в мастерской! Пользуйтесь полезными советами и хитростями! А БОРОДАТЫЙ МАСТЕР вам в этом поможет. И я надеюсь вы не будите скучать.))))))
Присоединяйтесь и попрём)))

ВСЯ МУЗЫКА: player.epidemicsound.com/

ХОСТЫ в дизайне сада! ХОСТА на СОЛНЦЕ - миф или реальность? Посадка, уход и МОИ СЕКРЕТЫ выращивания!


ХОСТЫ в САДУ: посадка и уход, секреты выращивания хост на солнце, такие ли уж ХОСТЫ тенелюбивые растения? Есть ли солнцелюбивые сорта хост? И как вырастить красивую, большую, пышную хосту на своем участке?! А можно ли вырастить хосту на солнечном участке? Существуют ли специальные сорта хост для солнечных участков или есть определенные правила посадки хост на солнце?
Обо все этом Вы узнаете, посмотрев это видео о хостах. Ведь хосты — самые популярные растения в наших садах. Необычайно популярна хоста и в ландшафтном дизайне сада.
Но чтобы вырастить красивую большую хосту на своем участке, надо знать некоторые секреты, правила посадки и ухода за хостами.
Вот, например, знаете ли Вы о том, что ХОСТЫ — это долгожители? Если хосту посадить правильно и в нужное место, то она может расти на одном месте десятилетиями, становясь год от года лишь красивее и пышнее!
Но как подобрать для хосты необходимые условия? Куда лучше высадить хосту? Тень или полутень? А может быть стоит высадить хосту на солнце? Не спешите улыбаться, лучше посмотрите это видео и Вы увидите, что большая часть хост в моем саду высажена на солнце! При этом хосты в моем саду прекрасно цветут и не болеют!
Обо всех тонкостях и хитростях посадки хост на солнце я расскажу в этом видео.
Также в этом видео я расскажу про размножение хост делением куста и черенками. Знаете ли Вы о том, что хосту очень легко размножить черенком или листиком? О том, как размножить хосту таким способом, я также расскажу в этом видео.

#ХостыПосадкаУход #ХостыВСаду #ХостыСорта