In my latest woodworking project, watch along as I show you how to build a chicken coop. As I finish up the chicken coop’s frame and roof, it’s then time to add the hen house, feeder, watering system and the finishing touches.
Overall I think that this chicken coop definitely does the trick, the chickens are safe and well cared for, and the coop should last for many years.
As always Im happy to answer any questions.
If you would like to support this channel you can do so here
We build a bushcraft saxon house with thatch roof using just simple hand tools. Inspired by anglo saxons, this iron age bushcraft shelter was built by a father and son using natural materials found in the surrounding forest. We used spades to dig a deep pit which was to be the foundations for the bushcraft shelter. The saxons built their houses over pits so that they did not need so many materials for their roof, and also to maintain a consistent temperature inside all year round. We then added four foundation logs to form the perimeter of the house. Using a chisel, we made some simple mortise and tenon joints and built a basic post and beam timber frame structure. We used the drawknife to peel off the bark which helps prevents bugs from eating away at the wood and rotting it quicker. We burnt the ends of the posts that went in the ground using an ancient Japanese technique called Shou Sugi Ban. This helps to make the wood more rot resistant when it goes into the ground. We then made some rafters and attached these to the frame. For the walls of the house, we used hazel and birch sticks. These are flexible and bent around the upright supports. We sourced some clay and straw and mixed these together and put this on the hazel walls. This is also and ancient technique known as wattle and daub. Once the clay had set hard, we focused on building the front and rear gable ends of the bushcraft shelter. We built these with pine logs, and rather than use vertical logs we used them horizontal to make a more solid structure. This gave the appearance of a log cabin. Now that the whole frame was complete, we built the roof. For the roofing material we used water reed to thatch it. We attached the thatch using hazel spars and liggers and we lashed this to the frame… Again, a very traditional building method. To cap the ridge off, we built a ridge roll of water reed and then used long straw to form an «A» shape over the ridge. This made sure that water would run off the roof and down the outside of the thatch. To make the structure warmer, we used moss to fill in the gaps in the wall logs. Later we will add clay to this to weather seal it. Once the thatch was on the roof, we dressed it smooth so water would run off easily.
This was a really fun bushcraft project which I did with my Dad. We built it over the period of a few months using basic building techniques, some diy and simple hand tools such as: axe, saw, chisel, spade, auger, drawknife and a few others. Thank you for watching.
Вопрос, как можно почистить ковер в домашних условиях интересует многих, ведь независимо от того какое покрытие используется, оно со временем загрязняется. Ковер дома всегда страдает от пятен, пыли и грязи больше других предметов интерьера. Особенно заметны загрязнения на мягком и пушистом изделии. Но и короткий ворс они не жалуют.
Я хочу вам показать, как не затрачивая много усилий почистить ковер в домашних условиях.
Не нужно покупать дорогие чистящие средства, все точно есть у вас дома.
✔Делитесь пожалуйста этим видео с друзьями, им тоже это пригодится!!!
Подписаться на новые видео —
√٥ www.youtube.com/channel/UCnnbdrQfCpSta_9LdP-HPwA
√٥ www.youtube.com/user/ElenaMatveevaV
√٥ www.youtube.com/channel/UCv0wIToIbJL07Qw7Lw6CBmQ
√٥ Инстаграм — www.instagram.com/elenamatveevabloger/
√٥ В контакте — vk.com/id53461872
Для удобства все видео распределены по плейлистам:
Самые интересные новости, конкурсы — goo.gl/WMq3AZ
Покупки в интернет-магазинах – goo.gl/6TChvf
Мои советы: красота, одежда, макияж! — goo.gl/mFLNOh
ВЛОГ/Vlog: Моя жизнь без прикрас, все о моей жизни — goo.gl/kys3fF
Отзывы о косметике, мой выбор — да или нет!!! — goo.gl/UV2J0v
Поделки своими руками от Elena Matveeva, сделай сам, идеи для творчества, diy, мастер-классы — goo.gl/z0QhA7
Юмор! Смеемся и поднимаем себе настроение!!! — goo.gl/qwhB80
Гардероб, стиль ✔Elena Matveeva — goo.gl/S0m6ZW
Готовим дома, загляни — самые простые и быстрые рецепты! — goo.gl/snIkkc
Бюджетные советы и секреты по домохозяйству — goo.gl/DssRAr
Бюджетные покупки или как купить за небольшие деньги — goo.gl/tXAU0f
Совместные видео!!! Блогеры объединяемся!!! – goo.gl/k6lkS5
Мои домашние животные, собака шар-пей — goo.gl/doS77y
Заработок в интернете — goo.gl/0OydbB
Макияж — как сделать новичку? — goo.gl/K2hmHo
Уроки фотомонтажа — goo.gl/zTq1l3
Комнатные цветы: уход, пересадка, размножение — goo.gl/x45hXW
Сад и огород /все о садовых цветах, даче и обо всем этом — goo.gl/2Gd8xh
Все о маникюре и педикюре! Ухаживаем красиво! — goo.gl/lELr8F
Волосы — все о них! Окраска, укладка, прически! — goo.gl/DtgbwQ
ЭКО (все о беременности и родах) — goo.gl/VGrz0t
Меня зовут Лена и я снимаю видео о себе, хобби, о косметике, даю полезные советы о красоте, как бюджетно вести хозяйство, как приготовить простые блюда и многое другое… Загляни и ты найдешь для себя много полезного и нужного. Мои видео выходят 4 раза в неделю, подпишитесь, чтоб не пропустить новые выпуски! www.youtube.com/user/MsElenaMatveeva
#полезныесоветы #ElenaMatveeva #бюджетныесоветы #вдомашнихусловиях #каксделать #видео
Легковой прицеп своими руками, очень популярное направление народного творчества. Здесь изложены все варианты изготовления легкового двухосного прицепа, которые я рассматривал в процессе. А так же дана оценка того, стоит ли вообще связываться с самостоятельным изготовлением прицепа.
Ever since I started my channel I had an arbor press on my wish list to restore. Not just because its an interesting good looking item, mainly because I want to have one in my shop. So I got very excited when my friend called me two weeks ago and told me that he has found one on the steel waste. Its a small Fehlmann arbor press, theyre very famous in switzerland for making the best ones.
I choose turquise blue for the main body and painted the letters black and I really like how to colour turned out. Unfortunately the table was missing, so I had to make a new one. I first planed to mill the slots on a CNC milling machine, but I couldnt get access to one in time so I decided to make it manually. It took some time to find a way to make them, took even more time to make them, but the endresult speaks for itself. It turned out absolutely perfect. I went with bluing on the gear part of the handle and sanded the handle itself. The name plate was from the previous seller of this press, its a well known seller for machines in Switzerland. As the plate was too damaged to use again, I decided to make my own „my mechanics“ plate out of aluminium. It took me three tries to get it to work and I ended up with a very nice and clean plate at the end. I went with a brushed finish for the name plate, as it fits the other finishes very well.
Overall Im very happy how the press turned out. I really like the contrast of the different colours and finishes and Im more than happy to finally own an arbor press in my shop. This tool will be very usefull and will for sure appear in future videos.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Noelle Sophy
Afreeflyingsoul
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Gregory
Hunter R.
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:42 disassembling
01:36 showing all the parts
01:45 removing the old paint with paint stripper
02:38 sandblasting
03:27 restoring the main body
04:12 applying filler on the main body
04:45 sanding the unpainted surfaces of the main body
05:14 masking the main body
05:32 applying two component primer on the main body
05:41 applying two component coat „turquise blue“ on the main body
05:51 painting the letters black of the main body
06:12 making the missing table on the lathe and milling machine
10:20 cleaning the other parts with the parts washer
10:41 removing the rust with rust remover
11:20 restoring the gear rack
12:31 restoring the handle
14:28 restoring the bolt
15:00 restoring the big washer
15:44 making a new name plate
17:39 showing the parts before reassembling
17:56 reassembling
18:55 showing the finished restoration
20:04 final test
Time and costs of this restoration:
I was working on this project for 1 week
$30 arbor press
$50 primer and coat
$8 steel for the table
$10 aluminium sheet for the name plate
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
