тут показано що може робити цей станок з різними насадками

Покупаете в интернете? Тогда данный бесплатный сервис поиска лучшей цены на товар в интернет магазинах именно для вас. Позволяет быстро найти нужный товар с наименьшей ценой среди множества интернет магазинов. Пользуюсь постоянно. Постоянно существенно экономлю деньги. Попробуйте вам понравиться. Сразу же понятно какие магазины завышают цены.
Ссылка на сервис — ya.cc/ECkdE Наш канал в Эфире — bit.ly/31If7Vn Это реально должно быть у каждого в доме — gb9vn.app.goo.gl/PJeM — Алиэкспресс Восстановление зрения с помощью просмотра ролика catcut.net/X6IE Наш второй канал — ТОП ТОВАРЫ ИЗ КИТАЯ (интересные видеообзоры китайских интернет-магазинов и их товаров) — bit.ly/2DCtlez Интересно!!! bit.ly/2pxgZjI!!! Крутой и очень эффективный сервис поиска товаров с меньшей ценой во всех интернет магазинах fas.st/KP99ib МОЯ РОДНАЯ ПЛАНЕТА zen.yandex.ru/planeta_kak_planeta НАШ ДЗЕН КАНАЛ Как сделать красивый забор из делового горбыля.

НАШ БЛОГ — ЭКСТРИМ СИТИ — www.extremecityhype.ru

СТРАНА ТОВАРОВ www.chinanana.ru

АВТОШТУЧКИ С АЛИЭКСПРЕСС — ok.ru/avtoshtukinev

Xiaomi — официальный сайт fas.st/vDSZeS

1. Официальный купонный сайт Алиэкспресс ali.ski/UOODvq

2. Официальный сайт Алиэкспресс, осуществляющий автоподбор выгодного предложения именно для Вас, действует с учетом все Ваших интересов, зафиксированных браузером ali.ski/VrFaX

3. Официальный сайт Алиэкспресс, где представлены товары только с бесплатной доставкой ali.ski/o-cae

4. Официальный сайт Алиэкспресс товаров стоимостью до 10 $ США ali.ski/M8Jgo

5. Официальный сайт Алиэкспресс распродажи ali.ski/eCTA8

Xiaomi — официальный сайт fas.st/vDSZeS

ali.pub/2fijum — ссылка для регистрации в кэшбэк сервисе Алиэкспресс. Очень простая регистрация необходима для получения вознаграждения в виде возврата части средств при каждой покупке.

Чтобы знать минимальную цену товара на Aliexpress и быстро находить такой же у другого продавца, установите расширение для браузера Aliprice
www.aliprice.com/?z=6areJWqEzY

Принимаем товары для обзора. Предложения направлять на почту для деловых предложений канала либо оставляйте в комментариях.

ytimg.preload(https://r2---sn-axq7sn76.googlevideo.com/generate_204);ytimg.preload(https://r2---sn-axq7sn76.googlevideo.com/generate_204?conn2);арочный навес N28 из металлочерепицы — YouTube<link rel=«alternate» type=«application/json oembed» href=«www.youtube.com/oembed?format=json

фотографии взяты из просторов интернета, находящиеся в свободном доступе.

Лучшая партнерка на YouTube — AIR Выплаты от 0,50 $. Такого больше нету ни в одной медиасети! Agency of Internet Rights — лучший выбор для молодого канала!.. Не нужно копить 100 долларов, AIR позволяет выводить деньги каждый месяц! Вот ссылка join.air.io/OVEL79

I found 4 newborn puppies in the cave without mother. i wait for dogs mum a day but dont have any dog come. so, i took them to my lion head house feed them with milk and build a new mud castle dog house for them with playground and waterfall for them. they will walk around when they grow up bigger and bigger. 50 days after rescue i try to feed them now they get bigger and healthy. Now building this castle completed with Moat around great wall and raising the catfish in this fish pond.
Please watch video until finish and SUBSCRIBE to get more videos.
Thank you.
For more detail follow me on:
Facebook: www.facebook.com/housetechnolo

How To Build The Most Modern Underground Swimming Pools with Underground House

GET READY...things are about to get Primitive Unique Tool Channel
#PrimitiveUniqueTool
© PLEASE NOTICE: All of my videos are owned by Primitive Unique Tool. Please dont re-upload if you dont want to get any copyright issues.

Leave a Like if you enjoyed its. Please Subscribe if you want to see more video

Subscribe Here: bit.ly/2MmtNkp

Thank you for support my channel.

ВСЕМ ПРИВЕТ! сегодня влог, давненько я их не делал ) расскажу как я пилю осину чтобы получить боле менее ровные доски с этого ценного дерева)так как есть вопросы по этому поводу, ну и поговорим о некоторых вопросах касаемо других проектов. приятного просмотра )
баня по дешману

ч1https://www.youtube.com/watch?v=1rdmeiSFBYg

ч2https://www.youtube.com/watch?v=uisngTYsHvo

ч3https://www.youtube.com/watch?v=aenllLV797s

ч4https://www.youtube.com/watch?v=aR7omd0GqkU

ч5https://www.youtube.com/watch?v=C-3YQYDcjXA

ч6https://www.youtube.com/watch?v=uRiB31kiEQI

ч7https://www.youtube.com/watch?v=i3WW8l-KJjw

ч8https://www.youtube.com/watch?v=g4B507iUfP0

ч9https://www.youtube.com/watch?v=vHmkS_nATuA

про бассейн

ч1https://www.youtube.com/watch?v=M2S-87cJ6sw

ч2https://www.youtube.com/watch?v=W2mNa0AMu2E

ч3https://www.youtube.com/watch?v=JdoCqq0uE5g

ч4https://www.youtube.com/watch?v=gK1sGWQD8zM

ч5https://www.youtube.com/watch?v=rE7qlXgGQgg

про пилораму

ч1https://www.youtube.com/watch?v=44ppdJ8NuNA

ч2https://www.youtube.com/watch?v=FdUQHybQNZc

ч3https://www.youtube.com/watch?v=1s1HGqquXSQ

ч4https://www.youtube.com/watch?v=Qz6dtsKH2Jo

ч5https://www.youtube.com/watch?v=x0-S3w0_Zsc

ч6https://www.youtube.com/watch?v=1G_6yZjcXz0

ч7httphttps://www.youtube.com/watch?v=QvsRLv_d8eYs://www.youtube.com/watch?v=MrS0XsBwMNg

ч8

В этом видео мы вам покажем как я с старого огнетушителя сделал нужную вещь. Ресивер. Этот переносной ресивер очень удобный, им можно подкачать в трудно доступном месте. Крутая самоделка, советую всем.
А также подписывайтесь, ставьте лайк у нас очень много интересного.
Смотрите наше видео youtu.be/jICqvmyqHyk
экструдер youtu.be/R8aRq_xzTwo
фуражный прицеп youtu.be/4ZHKc7VOshM
youtu.be/R8aRq_xzTwo

In this video im restoring an old broken and rusty Padlock.

This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes

Timestamps:

00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test

Time and costs of this restoration:

I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

In this video im restoring a hopeless case of a super rusty rebar cutter.

People from all over the world send me pictures of their items theyd like to have restored by me in a video. Mostly the items do not look bad enough, not enough rust or not broken enough for an interesting video. However this rebar cutter caught my attention from the first look at it. Marco from Italy was so nice to ship it to me to Switzerland, he gave me this shear for free means he doesnt want to have it back. Thank you very much for that. Right when I saw the pictures I knew this would probably be a very challenging restoration because of all that rust. I assumed that it would be all seized up and a nightmare to disassemble and I was right. This cutter only has four bolts and is built together by only five parts, but I was busy with the disassembling for three days. It was very difficult to get the two big bolts out, specially the smaller one. It needed 12 tons on the hydraulic press and I needed to drill one bolt hollow. I made a lot of parts new on this project, Ive only kept three parts original: the body and the two moving parts. As the handle was missing, I made a new one which required quite a few steps of machining, welding and grinding but the end result turned out very nice. As I almost made the whole thing new I decided to give this tool a modern touch with the choice of colour, thats why I went with orange.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Matthew Holcomb
Afreeflyingsoul
Andreas Prüm
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Gregory
Hunter R.
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Zachary Grimes

Timestamps:

00:00 preview
00:33 disassembling
04:07 showing all the parts
04:21 cleaning the parts with the parts washer
04:33 sandblasting
05:24 showing the sandblasted parts
05:31 restoring the body
07:01 restoring the movable jaw
07:37 restoring the movable gear part
08:14 making the small nut on the lathe
08:59 making the big nut
09:12 making the small bolt on the lathe
10:21 making the big bolt
10:35 making two washers for the bolts on the lathe
11:11 making two new M8 bolts and washers on the lathe
12:10 start of making the missing handle
12:15 preparing the tube on the lathe
12:54 making the domed cap on the lathe
13:20 welding the domed cap on the tube
13:29 cleaning up the welds of the domed cap on the lathe
13:46 making the connection piece to the tool on the lathe
14:57 milling the sides flat and welding up the plates
16:19 welding the connection piece on the tube and turn it clean on the lathe
16:50 making two threads in the connection piece
17:14 sandblasting the handle
17:28 bluing all the parts
18:08 painting the handle and the body
18:43 making two new cutting bits
19:20 hardening and tempering the cutting bits
20:03 showing all the parts before reassembling
20:17 reassembling
21:52 showing the finished restoration
22:43 final test

Time and costs of this restoration:

I was working on this project for 3.5 weeks
$60 painting (primer and orange coat)
$50 dinner for my friend for the hardening :-)

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

my mechanics T-Shirts:
teespring.com/stores/my-mechanics

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/